Product Description
Plug-in cable connectors are fully insulated, fully sealed plug-in terminals that can be touched with electricity. They are widely used in outdoor distribution transformers, American box transformers, ring main units, cable branch boxes, and underground transformers. and other electrical equipment connections.
It uses high-quality (EPDM rubber) insulation, and the conductive rod link joint has arc-extinguishing material, so it can be operated in a live state, but it cannot cut off the short-circuit current and can be used as a load switch to break the current
br/> Suitable for cross-linked polyethylene cables with a cable cross-section of ~.
Main technical parameters
Plug-in cable connector
Main technical parameters
Rated voltage
Maximum phase-to-phase voltage
/>
Maximum phase-to-ground voltage
One minute power frequency withstand voltage
Minute DC withstand voltage
Lightning impulse voltage
Rated current
Hourly overload
Breaking current
.,, times operation
Short-term withstand current
/
Standard packaging
●Cable connector, test point cap, ground wire, marking ring
● Insertion and extraction rod
● Knife wrench
● Silicone grease
● Cleaning paper
● Crimp terminals
● Installation instructions
● Product certificate
Product structure
The unique formula and mixing technology of the insulation layer ensure prefabricated insulation The high quality of rubber
, the operating ring is an integrally molded stainless steel operating ring with a spring clip fixing point
, the voltage test point is used to test whether the line is live and needs to be matched with the live indicator
, inside The conductive rubber prefabricated in the semi-conductive layer effectively controls electrical stress
. The pre-fabricated conductive rubber in the outer semi-conductive layer cooperates with the cable shield to achieve continuous shielding and ensure that the outer semi-conductive layer is in a grounded state
. Arc suppression The insertion rod is a tinned copper conductive rod with arc suppression function. Use the knife wrench provided in the box to screw it into the conductive connector
. Crimp terminals. Depending on the cable material, choose copper crimp terminals. Or copper and aluminum crimp terminals
Ordering information
Product name
(Model)
Concentric cable cross-sectional area with multi-strand cores
Cable insulation layer Outer diameter
Corresponding code
br/>/
Elbow type cable joint
br/>/
Elbow type cable joint
br/>/
Elbow type cable joint
br/>/
Elbow type cable joint
br/>/
Elbow type cable joint
br/>/
Elbow type cable joint
Fully insulated, fully sealed ZT-15kV/200A-35 elbow cable joint